Glycol Research Articles

Anti-plasticizing effect of water on prilocaine and lidocaine - the role of the hydrogen bonding pattern.

It is generally accepted that water, as an effective plasticizer, decreases the glass transition temperatures (Tgs) of amorphous drugs, potentially resulting in physical instabilities. However, recent studies suggest that water can also increase the Tgs of the amorphous forms of the drugs prilocaine (PRL) and lidocaine (LID), thus acting as an anti-plasticizer. To further understand the nature of the anti-plasticizing effect of water, interactions with different solvents and the resulting structural features of PRL and LID were investigated by Fourier transform infrared spectroscopy (FTIR) and quantum chemical simulations. Heavy water (deuterium oxides) was chosen as a solvent, as the deuterium and hydrogen atoms are electronically identical. It was found that substituting hydrogen with deuterium showed a minimal impact on the anti-plasticization of water on PRL. Ethanol and ethylene glycol were chosen as solvents to compare the hydrogen bonding patterns occurring between the hydroxyl groups of the solvents and PRL and LID. Comparison of the various Tgs showed a weaker anti-plasticizing potential of these two solvents on PRL and LID. The frequency shifts of the amide CO groups of PRL and LID due to the interactions with water, heavy water, ethanol, and ethylene glycol as observed in the FTIR spectra showed a correlation with the binding energies calculated by quantum chemical simulations. Overall, this study showed that the combination of weak hydrogen bonding and strong electrostatic contributions in hydrated PRL and LID could play an important role in inducing the anti-plasticizing effect of water on those drugs.

Tailoring Network Topology in Mechanically Robust Hydrogels for 3D Printing and Injection.

Tissue engineering and regenerative medicine are confronted with a persistent challenge: the urgent demand for robust, load-bearing, and biocompatible scaffolds that can effectively endure substantial deformation. Given that inadequate mechanical performance is typically rooted in structural deficiencies─specifically, the absence of energy dissipation mechanisms and network uniformity─a crucial step toward solving this problem is generating synthetic approaches that enable exquisite control over network architecture. This work systematically explores structure-property relationships in poly(ethylene glycol)-based hydrogels constructed utilizing thiol-yne chemistry. We systematically vary polymer concentration, constituent molar mass, and cross-linking protocols to understand the impact of architecture on hydrogel mechanical properties. The network architecture was resolved within the molecular model of Rubinstein-Panyukov to obtain the densities of chemical cross-links and entanglements. We employed both nucleophilic and radical pathways, uncovering notable differences in mechanical response, which highlight a remarkable degree of versatility achievable by tuning readily accessible parameters. Our approach yielded hydrogels with good cell viability and remarkably robust tensile and compression profiles. Finally, the hydrogels are shown to be amenable to advanced processing techniques by demonstrating injection- and extrusion-based 3D printing. Tuning the mechanism and network regularity during the cell-compatible formation of hydrogels is an emerging strategy to control the properties and processability of hydrogel biomaterials by making simple and rational design choices.

Stochastic-Based Optimization Strategy of Dimethyl Oxalate Hydrogenation for Ethylene Glycol Production

Stochastic-Based Optimization Strategy of Dimethyl Oxalate Hydrogenation for Ethylene Glycol Production

Structural Elucidation of Ubiquitin via Gas-Phase Ion/Ion Cross-Linking Reactions Using Sodium-Cationized Reagents Coupled with Infrared Multiphoton Dissociation.

Accurate structural determination of proteins is critical to understanding their biological functions and the impact of structural disruption on disease progression. Gas-phase cross-linking mass spectrometry (XL-MS) via ion/ion reactions between multiply charged protein cations and singly charged cross-linker anions has previously been developed to obtain low-resolution structural information on proteins. This method significantly shortens experimental time relative to conventional solution-phase XL-MS but has several technical limitations: (1) the singly deprotonated N-hydroxysulfosuccinimide (sulfo-NHS)-based cross-linker anions are restricted to attachment at neutral amine groups of basic amino acid residues and (2) analyzing terminal cross-linked fragment ions is insufficient to unambiguously localize sites of linker attachment. Herein, we demonstrate enhanced structural information for alcohol-denatured A-state ubiquitin obtained from an alternative gas-phase XL-MS approach. Briefly, singly sodiated ethylene glycol bis(sulfosuccinimidyl succinate) (sulfo-EGS) cross-linker anions enable covalent cross-linking at both ammonium and amine groups. Additionally, covalently modified internal fragment ions, along with terminal b-/y-type counterparts, improve the determination of linker attachment sites. Molecular dynamics simulations validate experimentally obtained gas-phase conformations of denatured ubiquitin. This method has identified four cross-linking sites across 8+ ubiquitin, including two new sites in the N-terminal region of the protein that were originally inaccessible in prior gas-phase XL approaches. The two N-terminal cross-linking sites suggest that the N-terminal half of ubiquitin is more compact in gas-phase conformations. By comparison, the two C-terminal linker sites indicate the signature transformation of this region of the protein from a native to a denatured conformation. Overall, the results suggest that the solution-phase secondary structures of the A-state ubiquitin are conserved in the gas phase. This method also provides sufficient sensitivity to differentiate between two gas-phase conformers of the same charge state with subtle structural variations.

Unravelling Competitive Interactions between Polymer Side Chains and End Groups with β-Cyclodextrin.

This study investigates unexpected competitive host-guest interactions of β-cyclodextrin which can occur with polymers in aqueous solution, using the examples of the two polymers poly(oligo(ethylene glycol) methyl ether methacrylate) (POEGMA) and poly(glycerol mono methacrylate) (PGMA). Systematic structural modifications of the polymer provide insight into the host-guest interaction with β-cyclodextrin and the competition between side chains and end groups such as hydrophobic end groups remaining from reversible addition fragmentation chain transfer (RAFT) polymerization or intentionally implemented molecular recognition units such as arylazopyrazole (AAP) photoswitches. This article is protected by copyright. All rights reserved.

Self-healing Polyurethane Elastomers with Superior Tensile Strength and Elastic Recovery Based on Dynamic Oxime-carbamate and Hydrogen Bond Interactions.

The preparation of self-healing polyurethane elastomers (PUEs) incorporating dynamic bonds is of considerable practical significance. However, developing a PUE with outstanding mechanical properties and high self-healing efficiency poses a significant challenge. Herein, we have successfully developed a series of self-healing PUEs with various outstanding properties through rational molecular design. These PUEs incorporate m-xylylene diisocyanate and reversible dimethylglyoxime as hard segment, along with polytetramethylene ether glycol as soft segment. A significant amount of dynamic oxime-carbamate and hydrogen bonds are formed in hard segment. The microphase separated structure of the PUEs enables them to be colorless with a transparency of > 90%. Owing to the chemical composition and multiple dynamic interactions, the PUEs were endowed with ultra-high tensile strength of 34.5MPa, satisfactory toughness of 53.9MJ m-3, and great elastic recovery both at low and high strains. The movement of polymer molecular chains and the dynamic reversible interactions render a self-healing efficiency of 101% at 70°C. In addition, this self-healing polyurethane could still maintain high mechanical properties after recycling. This study provides a design strategy for the preparation of a comprehensive polyurethane with superior overall performance, which holds wide application prospects in the fields of flexible displays and solar cells. This article is protected by copyright. All rights reserved.

Methylotrophic bacteria from rice paddy soils: mineral-nitrogen-utilizing isolates richness in bulk soil and rhizosphere.

Methanol, the second most abundant volatile organic compound, primarily released from plants, is a major culprit disturbing atmospheric chemistry. Interestingly, ubiquitously found methanol-utilizing bacteria, play a vital role in mitigating atmospheric methanol effects. Despite being extensively characterized, the effect of nitrogen sources on the richness of methanol-utilizers in the bulk soil and rhizosphere is largely unknown. Therefore, the current study was planned to isolate, characterize and explore the richness of cultivable methylotrophs from the bulk soil and rhizosphere of a paddy field using media with varying nitrogen sources. Our data revealed that more genera of methylotrophs, including Methylobacterium, Ancylobacter, Achromobacter, Xanthobacter, Moraxella, and Klebsiella were enriched with the nitrate-based medium compared to only two genera, Hyphomicrobium and Methylobacterium, enriched with the ammonium-based medium. The richness of methylotrophic bacteria also differed substantially in the bulk soil as compared to the rhizosphere. Growth characterization revealed that majority of the newly isolated methanol-utilizing strains in this study exhibited better growth at 37°C instead of 30 or 45°C. Moreover, Hyphomicrobium sp. FSA2 was the only strain capable of utilizing methanol even at elevated temperature 45°C, showing its adaptability to a wide range of temperatures. Differential carbon substrate utilization profiling revealed the facultative nature of all isolated methanol-utilizer strains with Xanthobacter sp. TS3, being an important methanol-utilizer capable of degrading toxic compounds such as acetone and ethylene glycol. Overall, our study suggests the role of nutrients and plant-microbial interaction in shaping the composition of methanol-utilizers in terrestrial environment.

Phenylacetylene-Terminated Poly(Ethylene Glycol) as Ligands for Colloidal Noble Metal Nanoparticles: a New Tool for "Grafting to" Approach.

We report a new design of polymer phenylacetylene (PA) ligands and the ligand exchange methodology for colloidal noble metal nanoparticles (NPs). PA-terminated poly(ethylene glycol) (PEG) can bind to metal NPs through acetylide (M-C≡C-R) that affords a high grafting density. The ligand-metal interaction can be switched between σ bonding and extended π backbonding by changing grafting conditions. The σ bonding of PEG-PA with NPs is strong and it can compete with other capping ligands including thiols, while the π backbonding is much weaker. The σ bonding is also demonstrated to improve the catalytic performance of Pd for ethanol oxidation and prevent surface absorption of the reaction intermediates. Those unique binding characteristics will enrich the toolbox in the control of colloidal surface chemistry and their applications using polymer ligands.

Nonlinear Elastic Bottlebrush Polymer Hydrogels Modulate Actomyosin Mediated Protrusion Formation in Mesenchymal Stromal Cells.

The nonlinear elasticity of many tissue-specific extracellular matrices is difficult to recapitulate without the use of fibrous architectures, which couple strain-stiffening with stress relaxation. Herein, bottlebrush polymers are synthesized and crosslinked to form poly(ethylene glycol)-based hydrogels and used to study how strain-stiffening behavior affects human mesenchymal stromal cells (hMSCs). By tailoring the bottlebrush polymer length, the critical stress associated with the onset of network stiffening is systematically varied, and a unique protrusion-rich hMSC morphology emerges only at critical stresses within a biologically accessible stress regime. Local cell-matrix interactions are quantified using 3D traction force microscopy and small molecule inhibitors are used to identify cellular machinery that plays a critical role in hMSC mechanosensing of the engineered, strain-stiffening microenvironment. Collectively, this study demonstrates how covalently crosslinked bottlebrush polymer hydrogels can recapitulate strain-stiffening biomechanical cues at biologically relevant stresses and be used to probe how nonlinear elastic matrix properties regulate cellular processes.

Conductive Polypyrrole: Synthesis, Characterization, Thermal, and Electrical Properties for different applications

Abstract Pyrrole monomer (mPPy) in an aqueous solution was used to create the conductive polymer polypyrrole (a homo-PPy) using a chemical oxidative polymerization process over a period of several hours at room temperature. Ferric chloride (FeCl3) oxidant was used, and sodium dodecyl sulphate (C12H25NaO4S), a surfactant. The produced PPy samples were characterized using a variety of methods, including X-ray diffraction (XRD), the Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), Differential Thermal analysis (DTA), Thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). SEM images revealed that nanoparticles of a homo-PPy with radii of 60-90 nm were well evenly distributed in the structure. The thermal stability and electrical conductivity of homo-PPy nanoparticles were observed to rise with a different solvent content of homo-PPy nanoparticles. As temperature rises, the electrical resistivity of the FeCl3 oxidation decreases, resulting in enhanced conductivity. It has been noted that the conductivity of homo-PPy samples is 
 significantly influenced by their shape, and electrical conductivities ranging from.0.44 to 2.2 (Ω.m)-1. It was revealed that the solvent (ethylene glycol) and monomer had more successful heat stability. Results from FTIR and XRD analysis confirmed the structural formation of a homo-polypyrrole during synthesis from pyrrole monomer. Because of their improved electrical conductivity and thermal stability, homo-PPy nanoparticles have potential applications in energy storage, adsorption and contamination elimination, electromagnetic protection, and resistance to corrosion.

Experimental study, simulation and technical–economic feasibility of an interesterification plant for hydrocarbons synthesis by using plastics and frying oil waste

This work presents the experimental assessment of a 20 mL batch reactor’s efficacy in converting plastic and oil residues into biofuels. The reactor, designed for ease of use, is heated using a metallic system. The experiments explore plastic solubilization at various temperatures and residence times, employing a mixture of distilled water and ethylene glycol as the solvent. Initial findings reveal that plastic solubilization requires a temperature of 350 °C with an ethylene glycol mole fraction of 0.35, whereas 250 °C suffices with a mole fraction of 0.58. Additionally, the study includes a process simulation of a plant utilizing a double fluidized bed gasifier and an economic evaluation of the interesterification/pyrolysis plant. Simulation results support project feasibility, estimating a total investment cost of approximately $12.99 million and annual operating expenses of around $17.98 million, with a projected payback period of about 5 years.

Determining The Crystallite Size of TiO2/EG-Water XRD Data Using the Scherrer Equation

<p class="Abstract">X-ray diffraction (XRD) data and the Scherrer equation were utilized to analyze the crystallite Size of titanium dioxide (TiO<sub>2</sub>) in a solution of ethylene glycol (EG) and distilled water. The XRD analysis was conducted using a Rigaku Miniflex 600 instrument with an X-ray wavelength of approximately 0.15046 nm. The examination yielded the full-width half maximum (FWHM), which was subsequently examined using the Scherrer equation. This experiment employed TiO<sub>2</sub> with a purity level of 99.8% and a crystal Size of 30 nm. The analysis revealed that the average crystallite Size of TiO<sub>2</sub> in the sample is 19.45 nm, with the highest measurement at about 30.38 nm. The Spearman correlation equation was employed to validate the outcomes. The Spearman's correlation coefficient between the FWHM variable and the crystallite Size of TiO<sub>2</sub> nanoparticles is -0.958. These findings shed light on the crystal structure of TiO<sub>2</sub> under these conditions. These findings lend support to the use of TiO<sub>2</sub> in a variety of nanotechnology applications. However, more research is needed to understand fully how crystallite-Size TiO<sub>2</sub> nanoparticles work in different settings and to find the best ways to prepare samples, including understanding the specific phase and how it affects the stability of fluids. This research contributes significantly to the understanding of the properties of TiO<sub>2</sub> in a solution of distilled water and EG, as well as to the characterization of nanomaterials, with particular emphasis on issue 9 of the SDGS Goal concerning industry, innovation, and infrastructure.</p>

Experimental methods in chemical engineering: Karl Fischer titration

AbstractKarl Fischer titration (KF) measures the water content in organic and inorganic compounds. Water reacts with a titrant solution containing iodine and a sulphurous monoalkyl ester to produce a monoalkyl sulphate ester and HI. In volumetric titrators, a burette injects the titrant directly into a cell while coulometric titrators generate titrant in situ. Regardless of the volume of the sample, volumetric titration is limited to 100 mg, while coulometric titration is best suited for . KF is fast (), considered accurate (), and precise (). However, factors such as humidity, non‐standard analytes (hexane, isopropanol, ethylene glycol), tritrant composition, and temperature compromise its repeatability: the % sample standard deviation, (), varied from 2% to 60% (). This high variability is, in part, due to the experimental design that included samples and conditions ill‐suited for the technique. However, even for the tests for which KF is suitable, . Certain compounds react with the titrant, which increases the variability. The main sources of error affecting the analysis are ambient moisture, pH, solvent, sample handling, and titration speed. As of 2023, the Web of Science has indexed 1332 articles with Karl Fischer as a key word (Topic), but more than 3600 mentioning the technique (All fields). A bibliometric analysis classifies these contributions into five clusters: spectroscopy, stability, temperature, solubility, and mixtures.

Synthesis, characterization, physicochemical, and electrical properties of natural (bio) nanofluids

AbstractEnergy conservation and sustainability to reduce the dependence on conventional sources have resulted in modified or advanced process practices. One such is the use of nanofluids for enhanced energy efficiency. However, such practices must not be at the cost of environmental hazards. The current study emphasizes bio‐based nanofluids formulated at five different volumetric concentrations (0.2%, 0.4%, 0.6%, 0.8%, and 1.0%) using Flamboyant (Royal Poinciana) tree bark nanoparticles with ethylene glycol as base fluid. The nanoparticles synthesized by cost‐effective extensive ball milling technique were spherical in shape. Analyzing the nanofluid with TEM confirms the particles as evenly distributed with an average diameter of 26 nm. Elemental analysis shows that the bio powder contains oxides of Calcium and Silicon. The pH, electrical conductivity, and viscosity of the prepared flamboyant tree bark‐ethylene glycol (FTB‐EG) nanofluid were quantified between 20 and 70°C. Although the properties enhanced with increase in concentration, the viscosity and pH decreased with temperature rise, while the electrical conductivity behaved contradictory. The maximum and minimum values of the properties were attributed to 1.0% and 0.2% concentrations, respectively. The correlations were proposed and the deviation between the measured and correlation data was less than 10%.

Wireless Sensor System Based on Organohydrogel Ionic Skin for Physiological Activity Monitoring.

Supermolecular hydrogel ionic skin (i-skin) linked with smartphones has attracted widespread attention in physiological activity detection due to its good stability in complex scenarios. However, the low ionic conductivity, inferior mechanical properties, poor contact adhesion, and insufficient freeze resistance of most used hydrogels limit their practical application in flexible electronics. Herein, a novel multifunctional poly(vinyl alcohol)-based conductive organohydrogel (PCEL5.0%) with a supermolecular structure was constructed by innovatively employing sodium carboxymethyl cellulose (CMC-Na) as reinforcement material, ethylene glycol as antifreeze, and lithium chloride as a water retaining agent. Thanks to the synergistic effect of these components, the PCEL5.0% organohydrogel shows excellent performance in terms of ionic conductivity (1.61 S m-1), mechanical properties (tensile strength of 70.38 kPa and elongation at break of 537.84%), interfacial adhesion (1.06 kPa to pig skin), frost resistance (-50.4 °C), water retention (67.1% at 22% relative humidity), and remoldability. The resultant PCEL5.0%-based i-skin delivers satisfactory sensitivity (GF = 1.38) with fast response (348 ms) and high precision under different deformations and low temperature (-25 °C). Significantly, the wireless sensor system based on the PCEL5.0% organohydrogel i-skin can transmit signals from physiological activities and sign language to a smartphone by Bluetooth technology and dynamically displays the status of these movements. The organohydrogel i-skin shows great potential in diverse fields of physiological activity detection, human-computer interaction, and rehabilitation medicine.

Anion‐Reinforced Solvation Structure Enables Stable Operation of Ether‐Based Electrolyte in High‐Voltage Potassium Metal Batteries

Electrolytes with anion‐dominated solvation are promising candidates to achieve dendrite‐free and high‐voltage potassium metal batteries. However, it's challenging to form anion‐reinforced solvates at low salt concentrations. Herein, we construct an anion‐reinforced solvation structure at a moderate concentration of 1.5 M with weakly coordinated cosolvent ethylene glycol dibutyl ether. The unique solvation structure accelerates the desolvation of K+, strengthens the oxidative stability to 4.94 V and facilitates the formation of inorganic‐rich and stable electrode‐electrolyte interface. These enable stable plating/stripping of K metal anode over 2200 h, high capacity retention of 83.0% after 150 cycles with a high cut‐off voltage of 4.5 V in K0.67MnO2//K cells, and even 91.5% after 30 cycles under 4.7 V. This work provides insight into weakly coordinated cosolvent and opens new avenues for designing ether‐based high‐voltage electrolytes.

Crack-Resistant and Tissue-Like Artificial Muscles with Low Temperature Activation and High Power Density.

Constructing soft robotics with safe human-machine interactions requires low-modulus, high-power-density artificial muscles that are sensitive to gentle stimuli. In addition, the ability to resist crack propagation during long-term actuation cycles is essential for a long service life. Herein, a material design is proposed to combine all these desirable attributes in a single artificial muscle platform. The design involves the molecular engineering of a liquid crystalline network with crystallizable segments and an ethylene glycol flexible spacer. A high degree of crystallinity can be afforded by utilizing aza-Michael chemistry to produce a low covalent crosslinking density, resulting in crack-insensitivity with a high fracture energy of 33720 J m-2 and a high fatigue threshold of 2250 J m-2. Such crack-resistant artificial muscle with tissue-matched modulus of 0.7MPa can generate a high power density of 450W kg-1 at a low temperature of 40°C. Notably, because of the presence of crystalline domains in the actuated state, no crack propagation is observed after 500 heating-cooling actuation cycles under a static load of 220kPa. This study points to a pathway for the creation of artificial muscles merging seemingly disparate, but desirable properties, broadening their application potential in smart devices.

Anion-Reinforced Solvation Structure Enables Stable Operation of Ether-Based Electrolyte in High-Voltage Potassium Metal Batteries.

Electrolytes with anion-dominated solvation are promising candidates to achieve dendrite-free and high-voltage potassium metal batteries. However, it's challenging to form anion-reinforced solvates at low salt concentrations. Herein, we construct an anion-reinforced solvation structure at a moderate concentration of 1.5 M with weakly coordinated cosolvent ethylene glycol dibutyl ether. The unique solvation structure accelerates the desolvation of K+, strengthens the oxidative stability to 4.94 V and facilitates the formation of inorganic-rich and stable electrode-electrolyte interface. These enable stable plating/stripping of K metal anode over 2200 h, high capacity retention of 83.0% after 150 cycles with a high cut-off voltage of 4.5 V in K0.67MnO2//K cells, and even 91.5% after 30 cycles under 4.7 V. This work provides insight into weakly coordinated cosolvent and opens new avenues for designing ether-based high-voltage electrolytes.

Rapid and robust hydrogen generation from sodium borohydride in optimum mixture of methanol and ethylene glycol using phosphorus-doped chitosan polymer matrix dispersed on alumina nanoparticles

Here, the highly efficient hydrogen (H2) generation by sodium borohydride (NaBH4) in a novel synergistic mixture of methanol and ethylene glycol using phosphorus-doped chitosan polymer matrix incorporated on alumina particles was investigated. The efficiency of P-doped chitosan-alumina hybride catalyst for H2 generation from NaBH4(NaBH4-HGR) in methanol, ethylene glycol, and methanol + ethylene glycol mixture showed significant differences. In particular, there is a very effective performance for NaBH4-HGR in a methanol + ethylene glycol mixture. The HGR values by mixture of methanol, ethylene glycol and methanol/ethylene glycol were 2342, 7364 and 13548 ml min-1g−1, respectively. Moreover, the H2 generation rate (HGR) value by NaBH4 using P-doped chitosan-alumina with the combination of methanol (8 ml) + ethylene glycol (2 ml) was 25,964 ml min-1g−1. Also, activation energy (Ea) was 30.62 kJmol−1. Additionally, the mechanism of H2 release by NaBH4 solvolysis reactions in the methanol + ethylene glycol mixture using P-doped chitosan-alumina was evaluated. In the methanol + ethylene glycol mixture, both the low viscosity of methanol and the high acidity of ethylene glycol are likely to have a positive synergistic effect on H2 production at the same time. Moreover, both the positivity of the P atoms and the increased acidity of the alumina become attractive to the negatively charged ions present in the reaction medium.

Insights into the hydrolysis/alcoholysis/ammonolysis mechanisms of ethylene naphthalate dimer using density functional theory (DFT) method

Hydrolysis, alcoholysis and ammonolysis are viable routes for the efficient degradation and recycling of polyethylene naphthalate (PEN) plastic waste. Various possible hydrolysis/alcoholysis/ammonolysis reaction pathways for the degradation mechanism of the ethylene naphthalate dimer were investigated using the density functional theory (DFT) B3P86/6-31++G(d,p). To determine the thermodynamic and kinetic parameters, geometric structure optimization and frequency calculation were performed on a range of intermediates, transition states, and products associated with the reaction. The calculation results show that the highest energy barrier of the main element reaction step in hydrolysis is about 169.0 kJ/mol, the lowest is about 151.0 kJ/mol for ammonolysis, and the second is about 155.0 kJ/mol for alcoholysis. The main hydrolysis products of the ethylene naphthalate dimer are 2,6-naphthalenedicarboxylic acid and ethylene glycol; the main products of alcoholysis are dimethyl naphthalene-2,6-dicarboxylate and ethylene glycol, and the main products of ammonolysis are naphthalene-2,6-dicarboxamide and ethylene glycol. Furthermore, in the process of ethylene naphthalate dimer hydrolysis/alcoholysis/ammonolysis, the decomposition reaction in the NH3 atmosphere is better than that in methanol, and the reaction in CH3OH is better than that in the H2O molecular environment, and the increase in reaction temperature can increase its spontaneity. Our study presents the molecular mechanism of PEN hydrolysis/alcoholysis/ammonolysis and provides a reference for studying the degradation of other plastic wastes.